Titàn ASTM B338 Gr12 tib echanj chalè
Oct 21, 2025
GNEE ka bay fòm nan
Pwodwi Deskripsyon
Titàn Klas 12 sanble ak Klas 2 ak Klas 3 eksepte Klas 12 gen adisyon Mo ak Ni. Ajoute sa yo nan Klas 12 ofri yon opsyon pri ki pi ba pase klas yo pote Palladium. Klas 12 gen gwo fòs, bon chalè ak rezistans mete epi li trè soude. Klas 12 yo itilize pou Pwosesis Chimik, jenerasyon pouvwa, Desalination, pwosesis Marin Hydrocarbon ak Mining.
Limit Konpozisyon Chimik
| % pwa | Ti | C | Fe | N | Mo | O | Ni | H | Lòt |
| Titàn Klas 12 | bal | 0.08 | 0.3 | 0.03 | 0.2/0.4 | 0.25 | 0.6/0.9 | 0.015 | 0.4 total max |
Pwopriyete mekanik tipik
| Materyèl | Fòs rupture min | Sede fòs | Elongasyon nan 2" (%) | ||||
| ksi | Mpa | Max | Min | ||||
| ksi | Mpa | Ksi | Mpa | ||||
| Titanium CP Grade12 Fèy rkwit |
70 | 483 | 50 | 345 | - | - | 18 |
Espesifikasyon
UNS R53401
ASTM B265 Gr12 Fèy/plak
ASTM B337 Gr12 tiyo (retire)
ASTM B338 Gr12 tib echanj chalè*
ASTM B348 Gr12 ba
ASTM B367 Gr12 depoze
ASTM B381 Gr12 forgings
ASTM F467 Gr12 nwa
ASTM F468 Gr12 boulon
Pwodwi ki bay pa GNEE
| Pwodwi prensipal | Klas komen (ASTM) | Espesifikasyon estanda | Tretman Sifas komen |
|---|---|---|---|
| Titàn Tib (San pwoblèm ak soude) |
Gr1, Gr2, Gr3, Gr7, Gr9, Gr12 | OD:3mm - 150 mm Epesè mi:0.5mm - 10 mm Longè:Jiska 6000 mm (personnalisable) Estanda: ASTM B337, ASTM B338 |
• Poli (glas / saten) • marinated • rkwit • Sandblasted |
| Titàn Fèy / Plak (woule frèt / woule cho) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Epesè:0.1mm - 50 mm Lajè:500mm - 1500 mm Longè:1000mm - 3000 mm Estanda: ASTM B265 |
• Poli (No.4, BA, glas) • marinated • rkwit • Sandblasted • Bwose |
| Titàn Fil | Gr1, Gr2, Gr5, Gr7 | Dyamèt:0.1mm - 6.0 mm Fòm:Bobin, Dwat Longè Estanda: ASTM B863, F67, F136 |
• Rekwit ak marinated • Bright (Pwòp) • Okside |
| Titàn Bar/Rod (Wonn, Egzagòn, Kare) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Dyamèt (wonn):3mm - 200 mm Egzagòn/Kare gwosè:4mm - 100 mm Longè:1000mm - 3000 mm (oswa koupe-a- gwosè) Estanda: ASTM B348 |
• Vire / Kale • Poli (tè san sant) • rkwit • Ksid Nwa |
| Titàn Foil | Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Epesè:0.03mm - 0.1 mm Lajè:50mm - 500 mm Estanda: ASTM B265 |
• Bright Aneled (BA) • Woule Fwad |
| Titàn CNC D' pati | Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Kapasite:Konpozan koutim ki baze sou desen kliyan yo. Pwosesis:Fraisage, Vire, Perçage, Tapping, elatriye. |
• Kòm-Machine • Ebavure • Poli / Tumbled • Anodizasyon (Koulè, Nwa) • Sandblasted • Pasivasyon |
